Hikvision Embedded Plug & Play 16-Port 32-Channel NVR

The Hikvision Embedded Plug & Play 16-Port 32-Channel NVR is a modern IP network video recorder capable of monitoring, recording and playing back images from 32 IP cameras of megapixel resolutions, up to 6 MP. This standalone NVR with VGA and HDMI outputs can be directly connected to a monitor, without a need for an additional computer. The NVR has 16 PoE ports (af/at) with maximum total load of 200 W. Thanks to Linux OS, the device is not exposed to attacks characteristic of Windows systems.

IP CCTV systems based on Hikvision IP cameras and NVRs can be configured for continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.

HIKVISION NVRs in IP networks can be controlled via IVMS 4200 software. The software allows for configuration and management of NVRs/DVRs and IP cameras. The iVMS 4200 utility can remotely manage up to 256 NVRs/DVRs. The user accounts can have different access/management rights, from the highest level of “administrator” to individually limited “guest” levels.

The local recording and network transmission uses H.264 compression that provides good image quality with relatively small bandwidth and disk space consumption. There is place for four SATA HDDs with total capacity up to 16 TB. In addition, the NVR supports NAS (NFS) and SAN (iSCSI) disk arrays. The option of automatic overwriting of existing material prevents the loss of the current data. Built-in USB ports can be used for control of the NVR via external devices and for connecting USB storage devices, usually to copy some data.

Hikvision DS-7732NI-E4/16P NVR Features

• Max total bandwidth (from all cameras): 160 Mbps
• Built-in 16-port PoE switch (af/at) with max load of 200 W
• Recording resolutions: 6MP/5MP/3MP/1080P,UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF
• HDMI and VGA outputs (working simultaneously) with resolution up to 1920 x 1080 pixels
• Stable operation
• Place for four SATA HDDs, each up 4 TB, or two SATA HDDs and DVD-R/W writer
• 2 x USB 2.0, 1 x USB 3.0, RS232 and RS485 interfaces
• 16 alarm inputs and 8 alarm outputs
• Simultaneous playback of 12 (720p) or 6 (1080p) or 16 (4CIF) channels directly from NVR
• Searching archives by alarm events
• Support for IE, Google Chrome, Opera, Safari web browsers
• Possibility of continuous recording with special parameters in the case of specific events (only for Hikvision cameras)
• Monitoring of the status of LAN, cameras, HDDs

Specifications:

Video/Audio Input
IP video input: | 32-ch
Two-way audio input: | 1-ch, RCA (2.0 Vp-p, 1kΩ)

Network
Incoming bandwidth: | 160Mbps
Outgoing bandwidth: | 80Mbps
Remote connection: | 128

Video/Audio Output
HDMI/VGA output: | 1-ch, resolution:
1920 × 1080P /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz,
1024 × 768 /60Hz
Recording Resolution: | 6MP/5MP/4MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Frame Rate: | Main stream: 50 fps (P) / 60 fps (N)
Sub-stream: 50 fps (P) / 60 fps (N)
Audio Output: | 1-ch, RCA (Linear, 1kΩ)
Synchronous Playback: | 16-ch

Decoding
Live view / Playback: | 6MP/5MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Capability: | 16-ch@4CIF, 12-ch@720P,
6-ch@1080P

Hard Disk
SATA: | 4 SATA interfaces for 2 HDDs + 1 DVD-R/W (default), or 4HDDs
Capacity: | Up to 6TB capacity for each HDD

External Interface
Network Interface: | 1RJ-45 10/100/1000Mbps self-adaptive Ethernet interface
USB Interface: | Front panel: 2 × USB 2.0
Rear panel: 1 × USB 3.0
Alarm In: | 16-ch
Alarm Out: | 4-ch

POE
Interface: | 16 independent 100 Mbps PoE network interfaces
Max. Power: | 200W
Supported Standard: | AF and AT

General
Power Supply: | 100~240VAC
Consumption(without hard disk and POE): | ≤ 20W
Working Temperature: | -10 ºC ~ +55 ºC (+14 ºF~ + 131 ºF)
Working Humidity: | 10 % ~ 90 %
Chassis: | 19-inch rack-mounted 1.5U chassis
Dimensions: | 445 × 390 × 70mm (17.5 ×15.3 × 2.8 inch)
Weight(without HDD): | ≤ 4 Kg (8.82 lb)