APC Smart-UPS VT 40kVA 400V

Tsh 33,810,000

Allows additional run time to be quickly added as needed.
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Delivers higher availability through redundant batteries.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Increases availability by allowing the UPS to be connected to two separate power sources.
Minimizes installation costs by enabling the use of smaller generators and cabling.
Provides remote power management of the UPS over the network.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Ensures that UPSs sold in the EU are highly efficient
Enables centralized management via the APC InfraStruXure Manager.
Provides notification of changing utility power and UPS power conditions
Quickly understand unit and power status with visual indicators.
Customize UPS capabilities with management cards.
Reduces installation costs by eliminating the need for an external mechanical bypass.
Minimizes installation costs by enabling the use of smaller generators and cabling.

SKU: SUVTP40KH4B4S Categories: 3 Phase UPS UPS Tags: 1 Year APC Smart UPS Smart UPS UPS Brand: APC

Description

Product Description

Output power capacity:
32.0 KWatts / 40.0 kVA
Max Configurable Power (Watts):
32.0 KWatts / 40.0 kVA
Nominal Output Voltage:
400V 3PH
Output Voltage Note:
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load:
96.0 %
Output Voltage Distortion:
Less than 5% at full load
Output Frequency (sync to mains):
47 – 53 Hz for 50 Hz nominal
Output Frequency (not synced):
50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages:
380, 415
Load Crest Factor:
3 : 1
Topology:
Double Conversion Online
Waveform type:
Sine wave
Maximum Output Current:
64
Output Connections:
(1) Hard Wire 4-wire (3PH + G) (Battery Backup)
(1) Screw Terminals (Battery Backup)
(1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
Bypass:
Built-in Maintenance Bypass, Built-in Static Bypass
Nominal Input Voltage:
400V 3PH
Input frequency:
40 – 70 Hz (auto sensing)
Input Connections:
Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations:
304 – 477V
Efficiency at Full Load:
96.0 %
Other Input Voltages:
380, 415
Maximum Input Current:
55.0A
Input Power Factor at Full Load:
0.98
Battery type:
VRLA
Included Battery Modules:
4
Typical recharge time:
5hour(s)
Nominal Battery Voltage:
+/-192 V (split battery referenced to neutral)
Expected Battery Life (years):
3 – 5
RBC Quantity:
4
Extendable Run Time:
1
Battery Volt-Amp-Hour Capacity:
9943
End of Discharge Battery Voltage:
+/-154 V
Interface Port(s):
DB-9 RS-232 , Smart-Slot
Pre-Installed SmartSlot™ Cards:
AP9631
Control panel:
Multi-function LCD status and control console
Audible Alarm:
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO):
Yes
Maximum Height:
1490mm , 149.0cm
Maximum Width:
523mm , 52.3cm
Maximum Depth:
842mm , 84.2cm
Net Weight:
629.09kg
Shipping weight:
660.0kg
Shipping Height:
1643mm , 164.3cm
Shipping Width:
650mm , 65.0cm
Shipping Depth:
1062mm , 106.2cm
Color:
Black
Units per Pallet:
1.0
Operating Environment:
0 – 40 °C
Operating Relative Humidity:
0 – 95 %
Operating Elevation:
0-999.9 meters
Storage Temperature:
-50 – 40 °C
Storage Relative Humidity:
0 – 95 %
Storage Elevation:
0-15000meters
Audible noise at 1 meter from surface of unit:
55.0dBA
Online thermal dissipation:
5459.0BTU/hr
Protection Class:
IP 20
Standard warranty:
1 year repair or replace, Start-Up Service