A-Data 1x8GB DDR3L-1600 ECC R-DIMM (PC3L-12800) DIMM CL11 Memory

The ADATA’s module is a 1024Mx72 bits 8GB(8192MB) DDR3-1600(CL11)-11-11-28 SDRAM memory module. The SPD is programmed to JEDEC standard latency 1600Mbps timing of 11-11-11-28 at 1.35V. The module is composed of eight-teen 512Mx8 bits CMOS DDR3 SDRAMs in FBGA package and one 2Kbit EEPROM in 8pin TDFN package on a 240pin glass–epoxy printed circuit board.

Features：

• Power supply (Normal): VDD & VDDQ = 1.35V (1.283V to 1.45V)

• Backward-compatible to VDD=+1.5V+-0.075V

• MRS Cycle with address key programs

– CAS Latency (5,6,7,8,9,10,11)

– Burst Length (BL):8 and 4 with Burst Chop(BC)

• Bi-directional, differential data strobe (DQS and /DQS)

• Differential clock input (CK, /CK) operation

• DLL aligns DQ and DQS transition with CK transition

• Double-data-rate architecture; two data transfers per clock cycle

• 8 independent internal bank

• Internal (self) calibration: Internal self calibration through ZQ pin (RZQ:240 ohm±1%)

• Auto refresh and self refresh

• Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C

• 8-bit pre-fetch.

• On Die Termination using ODT pin.

• On-board I2C temperature sensor with integrated serial presence-detect (SPD) EEPROM.

• EEPROM software write protect.

• Lead-free products are RoHS Compliant

Specifications:

• Frequency: 1600MHz

• Pin Count: 240 Pin

• Capacity: 8GB

• Timing CL-tRCD-tRP-tRAS: 11-11-11-28

• Voltage: 1.35V

• Rank Number: 1Rank/2Rank

• Heat Sink: No

• Operating Temp.: 0ºC to +85ºC

• Gold Finger Plating: 30 micro inch